SCHEDA TECNICA/ TECHNICAL DATASHEET
VALVOLE DI MASSIMA PRESSIONE DIFFERENZIATA
DIFFERENTIAL TYPE
RELIEF VALVES
Valvola utilizzata per limitare la pressione di un
circuito idraulico ad un determinato valore di
taratura. Al raggiungimento di tale valore la valvola
si apre e scarica la pressione in modo che questa
non salga oltre il valore di taratura. Questa valvola
differenziata è leggermente più lenta all’apertura
ma rimane più costante alla taratura al variare della
portata.
SCHEMA IDRAULICO
PRESSIONE / PORTATA
HYDRAULIC DIAGRAM
PRESSURE / FLOW
The relief valve provides overload protection in a
fast and accurate way: when it reaches pressure
setting, the valve opens allowing pressure relief
in order not to exceed this setting. The differential
valve opening is slower than the standard one, but
the setting is more stable when the ow changes.
USE AND OPERATION:
Collegare il ramo del circuito in pressione a P e il
ramo di scarico a T. La versione da 1” viene fornita
con doppia uscita T (una da tappare secondo le
necessità di montaggio).
• molle per diversi campi di taratura (vedi tabella)
• pressioni di taratura speciche (CODICE/T 000
specicando il valore di taratura)
Connect circuit port with pressure to P and tank port
to T. The 1” size is supplied with double exit T (1 exit
can be capped according with mounting needs).
A RICHIESTA
• different setting range (see the table)
• other setting available (CODE/T000 please specify
the desired setting)
TIPO / TYPE
VMPP
Corpo: acciaio zincato
Componenti interni: acciaio temprato termicamente
e retticato
Guarnizioni: BUNA N standard
Tenuta: a cono guidato. Tralamento trascurabile
Body: zinc-plated steel
Internal parts: hardened and ground steel.
Seals: BUNA N standard
Poppet type: minor leakage
Temperatura olio: 50°C - Viscosità olio: 30 cSt
Oil temperature: 50° C - Oil viscosity: 30 cSt
4.10
MATERIALS AND FEATURES:
APPLICATIONS:
MONTAGGIO:
ON REQUEST
MATERIALI E CARATTERISTICHE:
IMPIEGO:
Δ
Δ
P (BAR)
P (BAR)
FLOW - Q (l/min) FLOW - Q (l/min)
80 - 300
10 - 180
10 - 50
VMPP 3/4” VMPP 1”